- Codes p0455 evap large leak, p0457 evap leak, p06B8 internal control module RAM error Tested evap system for code p0455 and 457. Found stuck purge solenoid. Recommend replace the purge solenoid. Purge solenoid opens to allow stored fuel vapors to enter the engine and be burned with the fuel. Also is used for leak spdetection. P06B8 can be caused by lots of things, namely ignition coils going bad causing voltage spikes in the system. There are no stored misfires in the computer and no misfires felt at this time while driving. Recommend clear this code and repair the evap issue and see if this code returns.
- Change Motor Oil & Replace Oil Filter, Replace with Premium Motor Oil, Lube Chassis, Check all Fluid Levels, fill as needed. Check and adjust tire pressures. Perform multi-point inspection to inform customer about current vehicle status and future needs.
- ROTATE TIRES
- CANISTER PURGE VALVE – Remove & Replace – 2.5L Eng
CAROL H. gave our service a 5 star review on 8/25/2021